Ethernet Adapter Boot ROM's

• The boot ROMs are options to be installed on the network adapters's on-board remote boot socket. They contain boot programs that permit diskless workstations to boot from a boot server. Network administrators can set up a network security scheme by pre-defining a password, a boot volume and the boot volume's content for each workstation.

DE-224C, Ethernet Boot ROM for DE-220 Series

• Allow the D-Link DE-220 Series to Remote boot up to Netware 3.x, 4.x and D-Link's Superboot program
• Permits stations to boot operating system from server eliminating the need for floppy or hard drives.
• This ROM only supports Ethernet_802.2 RPL and Ethernet_802.3 NCP remote booting
• Auto-sensing on which protocol, will run at any setting that DE-220 series adapter can use.
• Easy implemented Netware NCP and RPL protocol
• OS/2 and LanServer supported
• Runs at any setting DE-220 can use
• Ethernet IEEE 802.3 10Mbit/sec hardware spec. compliant
• Supports any Ethernet topology
• Single 16K boot ROM
• Card is socketed for ROM

DE-534, Ethernet Boot ROM for DE-530CT

• Ethernet Boot ROM supporting LANsmart, Novell and Microsoft products for DE-530CT

DFE-504, Ethernet Boot ROM for DFE-500TX

• Ethernet Boot ROM supporting LANsmart, Novell and Microsoft products for DFE-500TX

NV-610, Ethernet Boot ROM for 8-bit ISA Adapters

• Ethernet Boot ROM supporting Novell Netware for 8-bit ISA Adapters

NV-620, Ethernet Boot ROM for 16-bit ISA Adapters

• Ethernet Boot ROM supporting Novell Netware for 16-bit ISA Adapters
• Works with any NE-2000 plug compatible adapter